BetterPhoto Q&A
Category: Best Camera Tripods

Photography Question 

Heidi Dunlop
 

Tripods for Photography: Fixing a Squeak


I have a Bogen 3265 head (about 6 years old). In the last year it has been making an awful squeak when I move it. I am afraid to use anything on it--like WD40. But the squeak has to go. Any ideas?


To love this question, log in above
April 11, 2005

 

BRYAN D. NEWMAN
  Heidi,
A very small amount of Dawn Dishwashing Liquid (or any other brand) should do the trick. WD40 shouldn't hurt anything. The trick is that anything you use, use it sparingly. Just make sure you remove any excess so that it doesn't get smeared and possibly get on your camera. Apply only a small "dab" where it is needed.


To love this comment, log in above
April 11, 2005

 

Bob Cammarata
  Try contacting Bogen's Web site directly to see what they recommend. This may be a condition that had occurred frequently enough that their "brain team" has already come up with the perfect solution to the problem.


To love this comment, log in above
April 11, 2005

 

Bill Boswell
  I wonder if you might have a bit of grit or sand in the mechanism. I would hesitate to use any lubricant since it may impair the locking function of your ball head.


To love this comment, log in above
April 12, 2005

 

Bill Boswell
  I wonder if you might have a bit of grit or sand in the mechanism. I would hesitate to use any lubricant since it may impair the locking function of your ball head.


To love this comment, log in above
April 12, 2005

 

Heidi Dunlop
  I went to Bogen website and really couldn't find anything that addressed the problem. I sent them a query--and we'll see if they respond. The sound of the squeak is like a dog's whine.
Also, although the locking function seems to work ok, the entire head swivels--and I can't figure out a solution to that either. (Another query to Bogen.) To be honest--the locking function is slipping. Especially if I use my 105mm 2.8 Nikon lens--which is a bit heavier. I see there is a new ball head pistol grip head out there by Bogen--maybe that is the intended fix for this problem--but I figured spending $80-100 on this head 6 years ago that it would last me much longer. I shopped and considered Bogen the best when I purchased the tripod setup.


To love this comment, log in above
April 12, 2005

 

Heidi Dunlop
  NO reponse from Bogen. Guess I'll try again.


To love this comment, log in above
April 20, 2005

 
This old forum is now archived. Use improved Forum here

Report this Thread