 BetterPhoto Member |
flash won't fire with camers Hi, I recently purchased a Sunpak 544 flash to use with my Canon Elan 7E. I am using a hot shoe adapter with a pc cord. The cord was supplied with the flash. The problem I am having is that I can not get the flash to fire automatically. The flash fires when I use the test button, but will not fire with my camera. What am I doing wrong? Please help. Thank you. Tammy Schmidt
|
|
|
|
||
|
Bob Cammarata |
Sounds like you might not be getting a good connection,...either with the cord, or on the hot-shoe. Try sliding the adapter off and on a few times, and crimping the p/c cord connector...(very gingerly)...before applying it.
|
|
|
|
||
|
Kip T. Berger |
Does the flash have a dedicated module specifically for canon? Think unless you use the off camera shoe cord2, you'll lose ttl capability with non speedlite flashes.
|
|
|
|
||
|
Jon Close |
Sunpak 544 is a non-dedicated (non-TTL) flash and should be usable with any camera. I'd follow Bob's suggestion to double check the cord's connection and make sure the hot shoe adaptor is fully seated in the shoe. Also check to make sure you haven't inadvertently set the camera's Custom Function #7 to "2", which disables the flash.
|
|
|
|
||
|
Jon Close |
Oops, CF 7 set to "3" disables the flash.
|
|
|
|
||
|
Jose Cruz |
i have the same problem with my EOS 10s and my sunpak 544, I use them with an adapter (hot shoe to pc) and it does not fire !!! what can be wrong?
|
|
|
|
||
|
This old forum is now archived. Use improved Forum here
Report this Thread |
||