out of 5
It was introduced in 1975 to replace the previous models of Calypso model I and II. This model is slightly larger than the previous ones. The speeds goes from B to 1/500. The Camera is divided in three basic parts: a) Case-Exterior part made of aluminum. b) Body- is attache to the case by an "O"ring that will prevent water leaking into the body of the camera. c)Lenses- could be 15mm,20mm,28mm,35mm and/or 80mm any of these lense are atached to the case by using a "o"ring to prevent leaking into the body and lense,of the camera. This camera must be washed with fresh water by submerging it in a deep container every time after a dive,and dry it before opened. The maximum depth of this camera is 160 ft.