Description

First I used the Unsharp Mask from the Filter menu to sharpen the image. Data used:
Amount = 200%, Radius = 2.0 pixels, Threshold = 0. Any more than that would result in halo around the edges. But the sharpening effect was minimal.

Then I used the Smart Sharpen, and the result was a little more visible. That is the image I am submitting. The data used is as follow:

In the Smart Sharpen Dialog Box, I used Advanced
Setting = Default
Sharpen - Amount = 200%, Radius = 3.8 pixels, Remove = Gaussain Blur (did not seem to make any difference as to which one I chose). Could not access the Angle.
Shadow – Fade Amount = 50%, Tonal width = 50%, Radius = 50 pixels.
Highlight - Fade Amount = 50%, Tonal width = 50%, Radius = 50 pixels.

It seemed to me that making Changes to the radius under the Sharpen submenu provided the big effect on sharpening the image. The Amount under the same submenu also contributed to the effect somewhat, the rest did very little. I used 50% etc. ju

Exif: F Number: 2.8, Exposure Bias Value: 0.33, ExposureTime: 10/2000 seconds, Flash: did not fire., ISO: 100, White balance: Auto white balance, FocalLength: 150.00 mm, Model: NIKON D200